Doors

AISPROYEC

DOORS

Aisproyec S.L. performs the manufacture and installation of all types of automatisms and doors: firebreak, sectional, lifting tables, vertical springs, blinds, and self-repairing rapid.

  • RAPID DOORS AP-ROLLSPEED (High speed door)
  • INSULATED ROLLER BLIND
  • RAPID STACKABLE DOOR
  • LOAD SPRING (AP-DOCK HYDRAULIC SPRING), AP-DOCK HYDRAULIC SPRING)
  • VERTICAL SPRING
  • HYDRAULIC SPRING “MINIRAMP”
  • TELESCOPIC HYDRAULIC SPRING
  • SCISSOR LIFTING TABLES
  • RETRACTABLE COAT FOR LOADING SPRING
  • AP POWERDRY DRYING ROTOR TECHNOLOGY
RAPID DOORS AP-ROLLSPEED (High speed door)

The Ap-RollSpeed high-speed roll-up door is designed to satisfy all the needs of passage between chambers, both heated and non-heated. The production process conceived for maximum flexibility guarantees deliveries in short delays. The quality of the materials, the exhaustive quality control of the assemblies and installations, the implemented security systems and an unbeatable value for money allow us to ensure that Ap-RollSpeed is one of the best products on the market.

INSULATED ROLLER BLIND

Shutter composed of profiled aluminum slats injected in polyurethane, laterally guided by extruded and lacquered aluminum legs and wound on an extruded aluminum drum.

Slats guided through polyethylene covered wheels to guarantee minimum noise. Motorization through side mounted motor with parachute and crank opening system meeting all safety requirements.

There are no torsion springs with the consequent savings in maintenance and equipment reliability.

Operated by ceiling handle, remote controls, magnetic loop, push buttons.

Maneuver in present man and fully automatic available.

RAPID STACKABLE DOOR

The stackable high-speed door is designed to meet all the needs of passage in large door openings. The quality of the materials, the exhaustive quality control of the assemblies and facilities, and the implemented security systems assure us of an unbeatable product.

VERTICAL SPRING

The Freeze Dock loading dock is designed to work in cold loading points, minimizing losses in the loading and unloading process as much as possible.

Technical characteristics:

It has an electro-hydraulic system for maneuver control. Rolling surface made of tear sheet metal (6/8 thickness, non-slip) reinforced by hot rolled profiles. Contact zone of the truck reinforced with folded sheet 8 mm thick, with recess and fold to minimize the step. With all the necessary safety systems (emergency mushroom in the frame, mechanical interlocking for maintenance, side skirting boards, etc …). Manufactured according to UNE-EN 1398 regulations.

We minimize cold losses:

The truck opens the doors from inside the warehouse, reducing losses to practically zero.

By closing the door in front of the dock, we achieve airtightness at the loading point.

Easy maintenance and cleaning:

The absence of a pit makes maintenance a comfortable task to perform. Technicians won’t have to dig into tight pits and work in impossible positions.

Even cleaning is easy. We only find a step of 350 mm

Avoid knocking on the doors of the charging point:

The platform’s resting position makes it impossible to accidentally hit the loading point doors.

LOAD SPRING (AP-DOCK HYDRAULIC SPRING), AP-DOCK HYDRAULIC SPRING)

The Aisproyec loading dock allows loading / unloading of trucks quickly, easily and safely. Intelligent design, a reliable manufacturing process and strict quality control are perfectly combined.

It has a hydraulic system for maneuver control. Tread made of tear sheet (6/8 thickness, non-slip) reinforced by hot rolled profiles, 410 mm folding lip made of tear sheet (13/15 thickness) with press stroke and front milling to fit the truck. Double H-shaped frame giving robustness to the set. With all the necessary security systems (emergency mushroom in frame, side foot guard, etc …). Manufactured according to UNE-EN 1398 regulations.

Maximum comfort in maintenance:

The motor in the front area of ​​the platform allows us to maintain the hydraulic unit without having to be inside the pit.

Easy installation:

The possibility of frontal loading with the help of a forklift facilitates installation on site.

In addition, our platform can be loaded from both sides and is prepared to be raised safely using four anchor points.

HYDRAULIC SPRING "MINIRAMP"

The MiniRamp Aisproyec loading dock allows loading / unloading of trucks quickly, easily and safely. Intelligent design, a reliable manufacturing process and strict quality control are perfectly combined.

It has a hydraulic system for maneuver control. Tread made of tear sheet (6/8 thickness, non-slip) reinforced by hot rolled profiles, 410 mm folding lip made of tear sheet (13/15 thickness) with press stroke and front milling to fit the truck. With all the necessary security systems (emergency mushroom in frame, side foot guard, etc …). Manufactured according to UNE-EN 1398 regulations.

TELESCOPIC HYDRAULIC SPRING

The Aisproyec Telescopic loading dock allows loading / unloading of trucks quickly, easily and safely. The 1000 mm lip allows us to cover loading / unloading situations that other models cannot.

The possibility of closing the sectional door in front of the platform minimizes cold losses when the platform is at rest.

It has a hydraulic system for maneuver control. Rolling surface composed of tear sheet (6/8 thickness, non-slip) reinforced by hot rolled profiles, 1000 mm telescopic lip made of tear sheet (6/8 thickness), hot rolled profiles and 8 mm pointed reinforcement. Double H-shaped frame giving robustness to the whole. With all the necessary security systems (emergency mushroom in the frame, security mast, etc …). Manufactured according to UNE-EN 1398 regulations.

Maximum comfort in maintenance:

The engine in the front area of ​​the platform allows us to maintain the hydraulic unit without having to be inside the pit.

Easy installation:

The possibility of frontal loading with the help of a forklift facilitates installation on site.

In addition, our platform can be loaded from both sides and is prepared to be raised safely using four anchor points.

SCISSOR LIFTING TABLES

Aisproyec supplies, installs customized hydraulic lifting tables, according to the specific needs of each application. Depending on the dimensions, height, elevation, load and use,

Aisproyec can supply single, double and triple scissor lift tables.

Single scissor lift tables are suitable for applications requiring a short lift stroke. They can allow a stroke of [0.6 x table length]. The achievable dimensions are from 1000 mm x 600 mm to 6000 mm x 3000 mm. They can work with maximum loads from 500 Kg to 6000 Kg. The ascent speed is calculated according to the application, designating the appropriate cubic centimeters of the pump for each case. The lowering speed is adjustable.

Double scissor lift tables are suitable for applications requiring a medium lift stroke. They can allow a stroke of [1.2 x long table]. The achievable dimensions are from 1000 mm x 600 mm to 4000 mm x 2000 mm. They can work with maximum loads from 500 Kg to 4000 Kg.

Triple scissor lift tables are suitable for applications requiring a high lift stroke. They can allow a stroke of [1.8 x table length]. The achievable dimensions are from 1000 mm x 600 mm to 4000 mm x 2000 mm. They can work with maximum loads from 500 Kg to 3000 Kg.

RETRACTABLE COAT FOR LOADING SPRING

Shelter for loading dock measures 3400 (Width) x 3500 (Height) x 600 (Depth) composed of a slotted extruded aluminum chassis topped with APM corner pieces.

1 m wide upper skirt made of PVC curtain with double polyester fabric.

600 mm wide side skirts.

Perimeter curtain made of PVC canvas and finished with Tent-keder on both sides to guarantee high resistance.

Articulated structure by means of labeled arms that allow the shelter to behave in a retractable way against contact with trucks.

Screen-printed skirts with Aisproyec corporate colors.

Other measures available.

Accessories such as inflatable sides available

AP POWERDRY DRYING ROTOR TECHNOLOGY

Desiccant rotor dehumidification technology consists of treating the air by passing it through a micro-perforated silica gel disc. All the water transported by the air is retained in the disk. The water particles are expelled outside through the rotor regeneration process.

– AVOID THE FORMATION OF ICE, FROST AND MIST IN ACCESS TO FROZEN CHAMBERS.

– AVOID CONDENSATION, PUDDLES AND WATER ON COLD SURFACES.

– CHASSIS CORROSION CONTROL.

– PHARMACEUTICAL INDUSTRY.

– FREEZING TUNNELS.

– FOOD DRYING.

PID Regeneration Temperature Control WITH AUTO TUNING. Maximum energy efficiency.

Touch screen for monitoring, configuration, display of alarms and indications for preventive maintenance.

Activation of regeneration resistors by solid state counters. Greater durability of the resistors and the drive.

Speed ​​control of the fans by variable frequency drive for better adjustment and lower consumption.

Possibility of connection to Ethernet of several machines. Machine network and centralization in complex facilities.

Catalogs

  • Catalogo de puertas

Where we are? Visit us, call us.

Central Valencia

Polígono Industrial Gutenberg C/ Milán, s/nº
46185 Pobla de Vallbona (Valencia-España)
Monday – Friday: 8 AM to 19 PM

Speak with us. Ask us. 

Delegación Centro

Polígono Industrial El Lomo C/ Begoña, nº6, 28970 Humanes de Madrid (Madrid-España)

Monday – Friday: 8 AM to 19 PM

Delegación Sur

Polígono Industrial Pean C/ Castilla y León, nº4, 29200 Antequera (Málaga-España)

Monday – Friday: 8 AM to 19 PM

Delegación Nordeste

Polígono Industrial Can Roqueta C/ Can Camps, nº17, 08202 Sabadell (Barcelona-España)

Monday – Friday: 8 AM to 19 PM